Solving AF2's Problems

Author: Mark Forster | Created: 2018-11-11 10:26 | Last Activity: 2019-01-2 14:54

Original Post

2018-11-11 10:26
Nuntym's thread on Solving AF1's Problems led me to think about AF2 (which after all was supposed at the time to be the answer to AF1's problems).

I'm trying out a few ideas I have had which should make AF2 radically more effective. If all works out well initially I'll post the instructions in a day or so for anyone who wants to have a go at trying it out.

Reply by james220

2018-11-11 16:59
Odd timing... I have just begun to use AF2 again a couple days ago...

Reply by Seraphim

2018-11-11 17:33
Here’s a link to the original AF2 instructions in case anyone needs it:
http://markforster.squarespace.com/blog/2009/6/27/autofocus-2-time-management-system-af2.html

Reply by Mark Forster

2018-11-12 14:19
Going well so far. If it survives another 24 hours I'll put it up in this thread.

Reply by james220

2018-11-12 16:46
From my trials of af2, one of the biggest flaws is that it gets harder and harder to reach the beginning of the list as the list expands. If this tweak fixes this then it might become one of my favorite systems.

Reply by Mark Forster

2018-11-12 19:32
james220:

Yes, it does solve that problem. The question is: Does it cause any other problems?

So far, so good.

Reply by Caibre65

2018-11-13 18:09
Mark

How are your ideas on AF2 going?

Reply by Nenad

2018-11-14 20:04
I am intrigued

Reply by nuntym

2018-11-15 4:11
I am intrigued too. So much in fact that I am trying out my own ideas for fixing AF2. And so far, it looks like it's a fix of AF2, AF3 and AF4 lol.

I'll post mine after you post yours, Mark!

Reply by Mark Forster

2018-11-16 12:10
Sorry to take longer than promised, but I got distracted onto other things.

The "AF2 Fix" actually works very well and has quite a number of advantages.

The rules are exactly the same as for AF2 ( http://markforster.squarespace.com/blog/2009/6/27/autofocus-2-time-management-system-af2.html ), except:

When your backward scanning takes you onto an earlier page on the list, a one-way lock comes into operation. What this means is that your scanning now starts each time back from the end of the earlier page, and continues to start from there until you get locked into a yet earlier page.

If you scan beyond the first page you circle back to the end of the list.

You can make this into an "AF1 fix" by scanning forwards instead of backwards. This is also quite effective, but having tried both I find the AF2 method slightly better.

Reply by vegheadjones

2018-11-16 14:11
Thank you Mark! I have been back on AF2 since this post and have liked it. This "fix." Seems interesting. I have one wuestion about scanning post-lock. For the purposes of my question lets assume I have five pages on my list...

1) I start on page 5, go back to page 4, find a task on line 6 to do. I complete the task and cross it off. Do I then:

Start on line 1 on page 5 (" the beginning of the earlier page") and scan from there up through pages 3,2,1 or:

2) Do I start on page 5, line 5 and work backwards, through page 4, etc.

I guess I am confused as to where " the beginning of the earlier page" is.

Reply by Mark Forster

2018-11-16 14:30
vegheadjones:

<< I guess I am confused as to where " the beginning of the earlier page" is. >>

It's not you who's confused - it's me!

It should have read "the end of the earlier page". I have amended it to make it clearer.

In your example therefore, assuming a page length of 30 lines, you are locked into page 4 and therefore scan upwards each time from line 30 of page 4 until no further task on that page stands out. Your scan then would land you on an earlier page (probably page 3), and you would be locked into that page in the same way.

Reply by vegheadjones

2018-11-16 14:46
Thanks Mark! Look forward to running it today, and will report back.

Reply by vegheadjones

2018-11-16 15:28
One more question:

I am on the last page of my list, and selected the task "read email." As always, reading email causes me to add more tasks, such that when I strike off email, I am no longer on the last page but the second-to-last i.e. (I added enough tasks to to start a new page).

Do I lock in on this newly christened second-to-last-page, or go to the new last page and start the scan from there?

Reply by Mark Forster

2018-11-16 15:37
vegheadjones:

You're locked into the actual page you are on. The only way to get out of that page is by scanning back to a previous page (i.e. nearer the beginning of the list).

You can of course scan right back through the list without selecting anything until you go from the first page round to the new last page, but that should be exceptional.

Reply by Seraphim

2018-11-16 16:43
Mark, you mention you could use this locking mechanism with AF1 also. I can't quite figure out how that would work. Could you elaborate a little more?

Reply by Alan Baljeu

2018-11-16 23:28
Seraphim: Apply the rules of AF2-fixed but go front to back top to bottom instead of the normal AF2 direction.

Reply by Mark Forster

2018-11-17 0:05
Seraphim:

<< you mention you could use this locking mechanism with AF1 also. I can't quite figure out how that would work. Could you elaborate a little more? >>

Alan's explanation is correct, but an alternative way of looking at it is that instead of circulating around the page as in normal AF1 you scan from the top active line on the page each time until you escape onto the next page.

Whether you use normal AF1 dismissal or AF2 dismissal is up to you.

Reply by Seraphim

2018-11-17 2:46
OK, thanks. Let me see if I understood this AF1 variant correctly. Let’s say you just finished some task in the middle of your 3rd active page.

Following standard AF1, you would then cross out that task, and keep scanning to the end of the page. If nothing stands out, you cycle back to the top of the page, and scan all the way through the tasks remaining on the page till something stands out. If something stands out, dot the task, act on it, then repeat this procedure. But if nothing stands out, you proceed to the 4th active page.

In this AF1 variant, you would cross out the task, then start scanning from the top of the page, and scan through all the tasks remaining on the page till something stands out. If something stands out, dot the task, act on it, then repeat this procedure. But if nothing stands out, you proceed to the 4th active page.

Is that correct? It seems like a very minor difference. But I know these minor differences can sometimes create a very different feel and very different results. Is that your experience?

On the other hand, the AF2 variant seems quite a bit different from standard AF2. It seems it would be less responsive to urgency and more thorough in processing the earlier tasks, which AF2 could neglect for long periods.

Just trying to make sure I understand... thanks!

Reply by Mark Forster

2018-11-17 10:09
Seraphim:

<< Let me see if I understood this AF1 variant correctly. >>

It's not really intended to be an AF1 variant. I only mentioned it because I was sure my eagle-eyed readers would point out that it would work both ways. In fact of course AF2 itself will work in reverse as well.

<< In this AF1 variant, you would cross out the task, then start scanning from the top of the page, and scan through all the tasks remaining on the page till something stands out. If something stands out, dot the task, act on it, then repeat this procedure. >>

Correct

<< But if nothing stands out, you proceed to the 4th active page. >>

In fact you don't just proceed to the page. You continue actively scanning until a task stands out.

<< It seems like a very minor difference. But I know these minor differences can sometimes create a very different feel and very different results. Is that your experience? >>

It does have a different feel, yes. But as I said in my post I prefer the AF2 variant. I really only mentioned the possible AF1 variant in passing. It wasn't intended as a recommendation.

<< On the other hand, the AF2 variant seems quite a bit different from standard AF2. It seems it would be less responsive to urgency and more thorough in processing the earlier tasks, which AF2 could neglect for long periods. >>

Correct.

Reply by Bernie

2018-11-19 18:31
Mark,

If one stays on the bottom-most page long enough, newly rewritten tasks will eventually overflow onto a new bottom page.

If I understand the rules correctly, one is still "locked" to that formerly-bottom-most page, and the overflowing tasks on the new bottom page are inaccessible until coming round the top of the list again. This seems brilliant, as it pushes us up the list automatically.

Is this what you have in mind for the last page?

Reply by Mark Forster

2018-11-20 15:00
Bernie:

Yes, that's correct.

Reply by nuntym

2018-11-21 3:59
I tried this AF2 variant, and I have a complaint: it doesn't "feel" like AF2.

AF2's major strength was in handling urgent items, so much so that it had a hard time handling old tasks, especially as the list got longer. This AF2 variant does not have those strengths nor weaknesses, since now it is weighted towards the older parts of the list with how it locks you to earlier pages.

Reply by Bernie

2018-11-21 19:36
We should call this new AF2 "The Salmon."

Reply by Mark Forster

2018-11-22 1:04
nuntym:

<< AF2's major strength was in handling urgent items, so much so that it had a hard time handling old tasks, especially as the list got longer. This AF2 variant does not have those strengths nor weaknesses, since now it is weighted towards the older parts of the list with how it locks you to earlier pages >>

Not entirely. The thing to remember is that the system does not necessarily lock you to the next page. It locks you to whichever page you scan to. So in fact you can move round the list at any speed you like.

Reply by vegheadjones

2018-11-27 21:12
Hi,

It's been 11 days following this method and I have to report I like it quite a bit. I start the day with a heavy emphasis on the last page, addressing new, urgent and currently in progress work and then swim upwards to the earlier pages. Often I swim straight up and back around to the last page without selecting anything else, but am reviewing everything and deciding the last page is where the action is. Other times I will address earlier work, either one-offs that get done right away, or longer work that gets some work done and rewritten at the end, which means it will have my attention early the next day, or when I swim back to it today.

Reply by JD

2019-01-2 5:55
Hi Vegheadjones,

I recall reading that you use Microsoft Outlook to manage your tasks lists.

Would you mind sharing briefly how you set up the tasks and pages in Outlook when using this system.

Reply by vegheadjones

2019-01-2 14:54
Hi JD,

I find Outlook tasks to be very good for FV/FVP and for the DWM systems. I have never been able to replicate the page setup so for AF2revised (which I still use and love) I use One Note. I use one page in an outline form, with 25 tasks under a child to indicate one page.

I am now trying Dynalist, which is great. (thanks Alan)